Rail Clamps

 

 

Part No.

Price
GJ-BLO332
Pair of Bridge Lift Outs, suitable for LGB type track (code 332)
Bridge Liftouts
In stock £18.00 per pair
GJ-BLO250
Pair of Bridge Lift Outs, suitable for Peco 45mm type track (code250)
 
In Stock £18.00 per pair
GLBLOSM32
Pair of Bridge Lift Outs, suitable for Peco 32mm type track
 
In Stock £18.00 per pair

 

Massoth Rail Clam

 
Massoth Rail Clamps
 
8100165
G-Gauge Rail Clamps (Brass)
Massoth brass rail clamps (patented) are made of extruded brass. The rail clamps conform to the track code 332. The product is well known and very popular. Hundreds of thousands are already sold. We use 100% pure high quality brass to guaranty best conductivity.
£1.20each
8102465
G-Gauge Rail Clamps (nickel-plated)
Nickel-plated Massoth brass rail clamps (patented). May be used with all stainless steal and nickel-plated tracks conforming to the track code 332.
 
8102050
G-Gauge Isolated Rail Clamps
Sturdy glass-enforced plastic rail clamps for G-gauge (code332). Extremely UV resistent. Available for brass and stainless steel tracks.
 
8102665
1-Gauge Rail Clamps (nickel-plated)
Small series production rail clamps for 1-gauge (code 250).
£1.20 each
       
       

 

Some of the advantages of these rail clamps are:
Restores electrical flow at the rail joint
No need to anchor track, just let it float in the ballast
They fit in the spaces between the ties and below the rail to hide in the ballast
Will weather the same as the rail
Clamps around bottom flange & centre web of rail - good surface contact with the rails
Will not weaken or lose contact in weather change
Easy to use and re-use with no damage to the rail clamp or the rail
Made of brass with stainless steel Allen-head screws
Perfect alignment of your rail.


Part No.

Name of Rail Clamp Hillman Clamps Description
Price
332-4
Insulated
Made of dark grey plastic. Best way to create gaps in the rail whilst still holding the rail in place. In Stock

In Stock £2.25 each
332-06
Extended
Made of brass with stainless steel Allen-head screws. Made for anywhere extra strong and/or long joints are needed. These rail clamps are 1" long.
In Stock £5.00 each
332-07 Triad Clamp
332-07 Adapter Rail Clamps provide tight, conductive connection between Code 332 rails made by different manufacturers or different batches from the same manufacturer.

The outside jaw of the 332-07 is in two separate pieces allowing the clamp to handle minor differences in the cross sections of the two rails; the solid inside jaw of the clamp aligns the inside edges of the rail heads to provide smooth passage of rolling-stock wheel flanges. (332-07 may also be used to join R3 and larger-radius curved track; it reduces by half the "straightening" stress resulting from using a straight-design clamp.)

Each 332-07 clamps completely around the rail flange--top, bottom and edges--as well as the base of the rail web. This exclusive Hillman design results in a joint that is extremely strong in all 3 dimensions and that ensures conductivity.
In Stock £6.50 per pair
332-1WS
Wheel Stop
Made of brass with stainless steel Allen-head screws. Made to replace bumpers at end of line. In Stock
In Stock
£11.50 per pair
332-01SA
Aristo Stainless Standard
For Aristocraft Stainless Steel Track tobe used without original joiner. They clamp around bottom flange and centre web of rail for a good surface contact with the rail
In Stock£2.25 each
332-1TMP
Tenmille Insulated
Made of dark grey PVC plastic. To be used as an insulated rail clamp. The best way to create electrical gaps in the rail whilst still holding the rail in place.
In Stock £1.60 each
250-01WS
Wheel Stop
Made of brass with stainless steel Allen-head screws. Made to replace bumpers at end of line. In Stock

In Stock £11.50 per pair
250-07 Triad Clamp
250-07 Adapter Rail Clamps provide tight, conductive connection between code 250 rails made by different manufacturers or different batches from the same manufacturer.

The outside jaw of the 250-07 is in two separate pieces allowing the clamp to handle minor differences in the cross sections of the two rails; the solid inside jaw of the clamp aligns the inside edges of the rail heads to provide smooth passage of rolling-stock wheel flanges. (250-07 may also be used to join R3 and larger-radius curved track; it reduces by half the "straightening" stress resulting from using a straight-design clamp.)

Each 250-07 clamps completely around the rail flange--top, bottom and edges--as well as the base of the rail web. This exclusive Hillman design results in a joint that is extremely strong in all 3 dimensions and that ensures conductivity.
In Stock £6.50 per pair
BRD-01
 
Long Blade Ball Drive - this tool has a ball at the end to make it easier to install your Hillman's Rail Clamps. Great for hard to reach places or awkward angles. In Stock
In Stock £6